TMG Industrial 75 Ton Shop Press-Unused
- 75 ton pressing capacity can be used for stamp work, flattening/bending metal, removing gears/bushings/bearings and more
- A dual hydraulic cylinder works pneumatically (125 PSI) and manually so you have total control, steady ram speed and smooth overall workflow
- Heavily constructed and fully welded H-frame adds rigidity and durability for long lasting commercial use in any shop environment
- Oil filled gauge that is readable in US and metric tons allows you to monitor pressing force accurately and with consistency while operating
- Steel cable crank winch provides ergonomic relief by eliminating excessive bending and allowing for easy up/down press bed adjustment
- Made to handle tough jobs under high pressures; equipped with an overload press valve that prevents use beyond the machine’s capacity
- Seven height positions provide superior workpiece adaptability to your unique needs and twin springs assist in efficient retraction of the piston rod
- Assembled size: 40” (L) x 40” (W) x 75” (H)
- Pressing force capacity: 75 ton
- Air pressure: 110-125 PSI
- Cylinder bore: 5”
- Ram stroke: 10”
- Bed depth: 11-¾”
- Bed width: 30”
- Upright opening: 42-½”
- Oil filled pressure gauge: 4”
- Non-slip safety clutch
- Pressing V-block included
- Shipping weight: 860 l
The TMG-SP75 Hydraulic Shop Press is an essential piece of equipment for any type of automotive shop, machining, metalworks, fabrication or assembly operations. An incredible 75 ton pressing capacity makes pushing bearings onto shafts, stamp work, bending or flattening metal safe, efficient and easy to do. This press has a fully welded heavy-duty H-frame construction that is rigid, durable and built to last in any shop environment.
A dual operating hydraulic cylinder works pneumatically or manually for total operator control, steady ram speed and smooth overall workflow. The steel cable crank winch provides ergonomic relief, eliminating excessive bending and allowing you to easily adjust the pressing bed up and down. Seven height positions also offer superior workpiece flexibility that will adapt to your specific work setting and requirements.
Made to handle tough jobs like gear and bushing removal, with an overload valve to prevent use beyond the machine’s capacity and twin springs that help with retraction of the piston rod. The oil filled gauge can be read in US and metric tons, and allows you to accurately monitor your pressing force while operating.
TMG Industrial 75 Ton Capacity Hydraulic Shop Press, Heavy Duty Pressing, Fully Welded H-Frame, Air & Manual Dual Operation, TMG-SP75
There are no bids for the lot at this time
Join our UNRESERVED, TIMED, ONLINE ONLY auction on WEDNESDAY, JUNE 14th at 11:00 a.m.
Pre bidding is Now Open!
Bidding:
Southern Interior Auctions uses bid extensions in its timed online auction sales. This means that within the last minute of the auction, if a bidder advances the bid, time is extended by 1 or 2 minutes (depending on the value of the item). Please watch carefully as we don't want you to miss out on a bid if time extends!
Please note there is a 12% buyer's premium in effect for this auction. Everything is also 100% unreserved and will sell to the highest bidder. So, factor in the buyer's premium and happy bidding!*
Good Luck with your bids!
1: All lots sold as is, where is, with all faults, imperfections and errors of description. Southern Interior Auctions are not responsible for errors of description or for genuiness or authenticity of any lot, or for any fault or defect in it.
2: The highest bidder to be the buyer; and if any disputes arise between two or more bidders the lot in dispute shall be immediately put up again and resold, or not, as the auctioneer may decide, who is also to regulate the biddings and be sole arbitor.
3: Purchases are to be removed at buyers expense and risk within 1 week after the conclusion of the session. In default of which, the auctioneers will not be resonsible for any loss or damage. Failure to remove the purchased items within 30 (thirty) days of the auction item will be deemed "abandoned" and disposed of by the Auctioneer at its sole discretion with no compensation for the buyer whatsoever.
4: Bidding at the sale is in Canadian dollars with an additional 12% buyers premium added to the auction price and all applicable taxes when payment is made by cash, debit or etransfer. When paying by E transfer, put your invoice number or name of bidder in the "message" window. A 3% convenience fee will be applied to the Buyer's premium when paying by credit card.
5: Southern Interior Auctions act as agents only; they have full discretion to refuse any bidding, to divide any lot, to combine any two or more lots and to withdraw any lots from the sale without any given reason.
6: All bidders are required to register through our website at bid.southerninteriorauctions.ca if you have trouble registering we can help you at the reception desk or call our office from 10:00 a.m. to 3:00 p.m. (PST) Tuesday through Saturday at 250-445-9994 prior to bidding. The bidder must be a minimum of 18 years of age . With the online/webcast auction, the bidder number is generated automatically by computer, you will receive this number upon registering. Registration will include full name and phone number. This system produces a more efficient auction and preserves anonymity of buyers.
7: Payment must be received no later than 3 days after the auction, no exceptions. Unpaid items will be lotted into the next auction. Payment can be made by cash, Etransfer, Visa, Mastercard, Interac or certified cheque (make payable to 0688483 BC LTD). No removal allowed before full satisfactory payment is made.
8: While every effort will be taken to load the vehicle in a safe and conscientious manner, Southern Interior Auctions (0688483 BC LTD) accepts no liability or responsibility for any damage or injury that may be incurred to the vehicle, to products, persons, trailer or personnel during the process. Southern Interior Auctions (0688483 BC LTD) reserves the right to refuse to load any vehicle that appears to be unsafe, not road worthy, or where the load exceeds the capacity or capability of the vehicle. If applicable, a Loading Waiver must be signed prior to loading item onto vehicle.
Industrial Area Entrance at the East end of Industrial Road 1
Cranbrook, British Columbia V1C 1G3
Canada
Wednesday, June 14th - 21st (1/2 hour after auction closes on June 14th ) 8:00 a.m. - 6:00 p.m.
ALL ITEMS MUST BE PICKED UP DURING THESE DAYS/TIMES